For one reason or another, our beautiful and powerful motorbike could one day refuse to start. Despite the tests carried out, nothing works. It could be really annoying especially when you are already late for a professional appointment or for an exam. At this moment, it is normal to be at the end of our nerves and the nervousness could easily take us away. And in the end we only have one possible solution, push it a few meters to be able to start. That said, it might not work if you don't know the right method. He therefore deserves to learn about the technique before being forced to push our bike over a long distance.
It is true that not everyone is necessarily skilled in mechanics. However, any motorcycle rider should know how to start it in the event of a breakdown to avoid calling a repairman every time it arises. Here are 5 steps to follow to be able to start a motorcycle with a stroller.
The 5 steps to follow to be able to start your motorcycle with a stroller
There are several reasons that can cause your motorcycle to not start, failure of gasoline, a battery that lets us down. It can happen that you find yourself in the middle of nowhere, alone and without the possibility of hoping for assistance. It is for this reason that knowing the techniques of starting with the stroller could always be useful. Here are the steps to follow in five points.
1. Push the motorcycle
The first step in getting started with a stroller is to push. It is true that it takes a little effort and requires energy, but this step is crucial for the rest of the operations. It is absolutely necessary to know that the technique of starting with the stroller or the forced start requires that you be on a road which is not too congested and quite spacious. Once the bike has gotten good momentum and you feel like you won't be able to push it anymore, jump into the saddle to move on to the next step.
2. Engage a gear
It is necessary to engage a gear in order to allow the motorcycle to start quickly. It's a bit like forcing the engine. As with the car, you have to engage 2nd gear for this. To change the speed you just have to press the clutch lever. Once the gear is engaged you are now ready for the next step.
3. Disengage
On this term we can easily get lost, it is difficult for an average person to differentiate the 2 words disengage and engage. Disengaging in terms of auto / motorcycle mechanics quite simply means the elimination of the action exerted by the engine on the wheels of the vehicle. This means that when you press the clutch control, you disengage. On this step, hold the clutch lever while continuing to push the motorcycle. Try to have a speed greater than or equal to 8 km / h for the technique to work.
4. Engage
For the rest of the operations you must engage, that is to say gradually release the clutch lever once you gain power, then press the starter. Then you can gradually accelerate until the motorcycle starts to start. However, to have control of your motorcycle once it starts to start, lightly squeeze the clutch lever.
5. Increase engine speed
This last step makes it possible to maintain the engine of your motorbike, you just need to engage a higher gear so that your motorbike does not turn off again. In the event that the engine coughs or has difficulty starting correctly, it will be necessary to descend from the saddle and start pushing again.
Some tips that can help you start your motorcycle with a stroller
One solution that allows a motorcycle to start after various kick failures, whether cold or hot, is the stroller. However, this technique does not always work. It really depends on the type of failure. It will therefore be necessary to verify the cause of this. If you run out of gas, this will not work, because of the empty tank. The only solution in this case is to put gasoline back into the tank. Also check that your tap is in the "on" position, that the stand is properly raised, and that the gears are in neutral. To check if the motorcycle in the stopped position is in neutral, try pushing it. Finally make sure that the circuit breaker is activated.
This stroller starting technique can also work in another way, shift the gear and then depress the clutch, push the motorcycle until it gains momentum, jump on it while letting go of the bike. clutch to allow the rear wheel to hang on the ground thanks to your weight, in the end the engine should start.
