Any motorcycle, regardless of make and performance levels, is potentially prone to abnormal behaviors when you ride it. These machine malfunctions are generally due to more or less worrying mechanical problems. Thus, it may happen that your motorcycle jerks when you are in the acceleration phase. It must be said that this can be particularly unpleasant for the driver and, even sometimes, a little dangerous. Since then, has your motorcycle started to jerk? Do you want to know how to go about solving the problem? Are you a little lost? This complete file tells you absolutely everything!
My motorbike crashes: where does the problem come from?
A motorbike that tugs can be particularly difficult to control while riding it. It is also desirable to wait until you have detected and clearly resolved the problem before taking it out for a walk again. It should be noted that the jerks distributed by the motorcycle can be explained by several mechanical problems, including the following:
Clutch problem
In the first place, they could come from a clutch in delicacy. Indeed, if your clutch takes excessively water or coolant, it is very likely that it gives a jerk. So when you try to start the motorcycle, it will only respond intermittently.
A faulty nozzle
In the second place, it would be necessary to seek the origin of the problem at the level of the jet of the machine. In fact, when your jet is in a bad state, it will tend to let in a lot of gasoline. This will probably cause jerking when you speed up the machine a little.
Tank too dirty or defective
Third, you can store in the radius the causes of the crash of the motorcycle is a tank that is too dirty or in very poor condition. If the tank is filled with slimy material and dust, or worse yet, is rusted, the motorcycle is likely to experience some malfunction. And, one of the most likely is the delivery of hugs while you're on the road.
Problems with the spark plugs and the chain
It is also possible that the collisions occur if the motorcycle's spark plugs are worn.
In addition, it is best to scrutinize the condition of the gear chain. In fact, if the chain is somewhat curled up or seized up, the motorcycle may give a little nudge.
The points listed on the chain are usually due to recurring high pressure cleaning of the motorcycle. The latter has the gift of making water penetrate to the joints, thus seizing the chain pins.
A problem with the engine brake
Finally, the problem could be with your engine brake failures. Note that you can find on this link other frequent mechanical problems that can cause the motorcycle to kick.
My motorbike is jerking off: what can I do to solve the problem?
In order to completely forget the jerks given by the motorcycle, it is best to consult a professional mechanic. There is no doubt that an expert in the field will help you find good feelings when you drive your machine. The appointment with your mechanic is all the more necessary as you have trouble identifying the origin of the abnormal behavior of the motorcycle.
However, if you have a little DIY skills, you can try to solve the problem yourself by following these different tips ...
Regular clutch maintenance
The first thing to do is to take a good look at the behavior of your clutch, especially if the problem occurs when starting. Clutch shoes can be finicky or even worse faulty. In this case, it is essential not to try to repair the clutch personally. This is a very complex task.
Maintain and clean the gas tank
The second thing to do is try to thoroughly clean the gas tank. It is, in fact, very dangerous to ride a motorcycle with a tank full of dirt. It is advisable to clean it regularly. Once this is done, it is recommended that you escort your tank with a fuel filter.
Checking the carburetor
The third thing to consider is to check the condition of the motorcycle's carburetor. In fact, a faulty carburetor can be the cause of several abnormal behaviors two-wheeled vehicles including that of the accoups.
Besides these tips, you can also try to repair the chain of the motorcycle if you find that the problem is there. However, if the motorcycle chain is found to be filled with stiff spots, then the only possible solution is replacement. You will need to buy a new chain and install it on the motorcycle.
Finally, do not forget to change, if necessary, the jet and / or the spark plugs of the motorcycle.
By following these tips, you will be able, to a certain extent, to stop the annoying thrusts distributed by your motorcycle.
Ultimately, remember that motorcycles are all intended to experience some technical or mechanical issues. However, with periodic and regular maintenance, you can undoubtedly preserve the quality of the parts of your motorcycle, and by extension, guarantee its longevity!
