It is quite normal for a motorcycle to get dirty while it is in motion. It could have accumulated certain dirt such as mud or various debris from elements that are in its path. We can say that you still will not have enough time for a manual wash. Knowing that this is less effective because all the corners of your motorcycle are not necessarily accessible. There is another way that is faster and more efficient, washing in Karcher. This device uses a high pressure washing system similar to what is found in a washing station. However, if you had a fairly spacious garage you could have an installation more or less similar to that found in a station, with an investment.
Washing with Karcher is a solution that allows you to reach areas inaccessible by hand. However, you must adopt the correct washing technique to avoid the risk of damaging certain parts of your motorcycle. You also need to use the right product to effectively remove grime. Here are 5 tips that will help you wash your Karcher motorcycle in a safe way.
The 5 tips that may be useful for washing your motorcycle with a karcher
Whether in your garage or in a car wash, it deserves that you are able to wash your motorcycle by adopting the right technique. To do this, you must follow the steps and take the necessary precautions. Here are five tips that can help you wash your motorcycle effectively with the Karcher.
1. Precautions
This high pressure washing technique is not without risk. There are certain precautions to be taken. Before you start washing, make sure your motorcycle engine is cool. To avoid the risk of damaging the bearings and connections of the motorcycle, move away and lower the water pressure when passing through these areas. Although this type of washing is infallible for removing dirt, it is not recommended to wash your motorcycle with Karcher frequently.
2. The distance to respect
During the washing session, try to keep a distance between 30 and 50 cm, especially when you have set the mode to high pressure. This distance helps protect sensitive parts such as the bearings of your wheels, the arrival of water in these areas can remove the grease. Respecting this distance also protects your connections from any external damage that could cause a short circuit.
3. Cleaning products
For the cleaning of the body you will need a foaming soap solution. To properly clean your motorcycle you can also use elbow grease, an oil that has already proven its worth in all types of household cleaning. For your rims use a special product that will protect them against rust and wear.
4. Additional tools
Apart from the washing machine, you will need a soft sponge or cloth to wipe surfaces which require a special product. To effectively remove grime, use a stiff bristle brush.
5. The correct washing technique
To begin with, you must moisten the motorcycle with the water diffuser jet while avoiding touching sensitive areas as much as possible. After that, you are going to soap it from a long bristle brush. A foam will remove the messy particles. Then you are going to rinse it all off to remove both the suds and the grime. Be careful, however, not to force the pressure. It is even advisable to use the low pressure jet system. To give your body a little more shine, you can use a special steel and plastic shampoo. However, do not forget to wipe well with a sponge and rinse at the end. To protect your rims, use a special degreasing product. You can also use elbow grease when washing.
Some tips that can help you effectively clean your motorcycle with a karcher
Washing your motorcycle is already a way to maintain it. The dirt that accumulates is not always harmless to the various internal parts. Washing with a karcher removes much of the grime that has accumulated during your travels. However, you have to adopt the right technique. Before using the karcher equipment, make sure you have read the contents of the user manual. In particular, the Safety Precautions and Grounding Instructions sections. If the manual is not found, consult the manufacturer's website.
You should know that following the passage of water all the elements that require grease must be replenished. For this purpose do not forget to replenish the chain of your motorcycle.
For washing, it is better to use only cold water. In the event that a salty substance is on your motorcycle, hot water will accelerate the effect of corrosion.
