If you are looking to squeeze more power out of your motorcycle, there are plenty of methods to do it. There are ways around this problem, and often getting the right parts running on your existing machine can get you into the promised land of performance without having to take out a second mortgage. Here we'll take a look at what changes you can make without the need for Daddy Warbucks bank accounts or mechanic skills.
Increase the power of your motorcycle engine by increasing the air consumption of your motorcycle
Think of your engine as a big air pump made up of recurring combustions that suck in and expel this ever crucial element of oxygen. Find ways to get larger volumes of air in and out of your engine and you will increase its power. The motorcycle's intake piping is usually quite constricted, so reducing restriction goes a long way to promoting combustion. Even a simple smoother filter can help, and increasing the area of the air inlet can also increase the overall volume; it is one of the cheapest and easiest ways to pump power.
However, be aware that some kits allow you to remove the entire airbox and leave the filters exposed to the elements, so choose your application wisely. Also be aware that this change alone can also lead to increased fuel consumption (the result of diluted air mixing), which is why you will need to adjust your carburetor or adjust your fuel injection accordingly.
Increase the power of your motorcycle engine by modernizing the exhaust
This change usually goes with our first suggestion. Because it must meet new emissions requirements and keep costs low, your exhaust manifold's ability to transport air efficiently tends to be compromised. That's why aftermarket exhaust systems are a good place to find extra horsepower and increase torque. You'll likely gain performance right off the bat, as an aftermarket system is lighter, but it will also expel exhaust gases more efficiently, so your engine will breathe better too. Typically, a 2-in-1 hose will give you the most useful power, especially in the lower half of the power range where 90% of drivers spend most of their time. They also tend to be quieter, if that matters. Exhaust exchangers are probably the most popular bolt-on modification because they add horsepower and torque, generally look better, and give your vehicle a better soundtrack. (Complete systems are the best overall option and should be designed specifically for your bike. Slide systems will add a bit of horsepower, but usually just at the bottom of the scale).
Increase the horsepower of your motorcycle engine by adding fuel filters
Fuel filters work by purifying fuel before it reaches the engine, resulting in more efficient combustion. Buying high quality filters and replacing them on a regular basis helps keep the engine clean and maintains its performance.
If you can afford it, you can also improve performance in this regard by using only premium gas, which has a higher octane rating, which essentially means more combustible fuel by volume.
It's not for nothing that professional racing motorcycles use a different fuel than that used at the pump. Both are fuel, but one is just more efficient.
Increase the power of your motorcycle engine by replacing the chips
Most motorcycles have an engine control unit (ECU), which is a small computer chip that controls (and in many borderline cases) the various functions of motorcycle parts, as well as the electrical circuits and gauges.
It is possible to modify its operation for more power and better performance, but there is usually a ripple effect (such as increased heat, greater fuel consumption, and longer overall life. short). There are also upper limits based on the coins themselves.
You can, of course, do a detrimental remapping, so make sure the person doing it is an expert.
Increase the power of your motorcycle engine by modifying your ignition
Your engine's ignition system is responsible for using electricity to create a spark and ignite the air / fuel mixture inside the combustion chamber. The main parts are made up of the ignition pilot, ignition coil, spark plug, wires and distributor. What you want to do is change the angle of control. A larger control angle means more ignition, therefore stronger combustion. Basically it's about kicking hard and fast.
Otherwise, just replace your stock with gold or platinum-plated candles. It also allows for a greater spark which gives the same increased kick to the combustion chamber.
These are just a few of the ways you can increase the horsepower of your motorcycle to get the most out of it!
