Motorcycles can sometimes be tricky to manage. These types of vehicles require real professionals for their maintenance. But some problems can be solved with a little knowledge and common sense. So we're here to walk you through the most effective and proven methods of fixing a slamming motorcycle chain.
If there is a minor malfunction in the chain of your motorcycle and you can do it yourself using a set of ordinary tools, then why go to a mechanic.
Here are the reasons responsible for the chain slamming of the motorcycle:
- Insufficient lubricant
- Worn chain sprocket
Motorcycle chains are a real issue for motorcycles. Without the chain, the motorcycle cannot run. The chain helps the motorcycle tire to roll on the road, which gives us the proper importance of chains in motorcycles. They therefore sometimes need special attention, otherwise they can cause problems for the motorcycle.
Motorcycle chains - General information
On the market, there are a whole bunch of motorcycle chains that meet specific needs. So, before you get started, we advise you to take a look at our complete guide on the subject.
Why is my motorcycle chain slipping?
We have for you some real time motorcycle chain problems and their solutions, which will help you in your daily life with your motorcycle and save you money. The motorcycle chain snaps which are inconvenient to handle while driving. So, without wasting any more time, let's see what we have for you.
Let us explain the reasons for these malfunctions and how you can remedy them.
A motorcycle chain that slams due to lack of lubrication:
Motorcycle chains are very noisy when not well maintained. They require more attention than other parts of the motorcycle. When motorcycles are subjected to a lot of dust and vaporized environments, the chains rust and their lubricant hardens. This is one of the most common causes that are responsible for motorcycle chain slamming.
The chain is always in motion when we are riding a motorcycle. So when the lubricating oil is hard, the chain and sprockets force that hard grease out of the chain. This process will remove the hardened grease and the motorcycle chain will have more friction with the sprocket.
When the friction between the chain and sprocket is greater, the slamming and wear of the chain and sprocket increases. So when there is more friction between the chain and sprocket, the sprocket set wears out sooner than it should. The motorcycle chain should therefore never be left in this condition, as it plays the most important role in the mechanism of the motorcycle.
solution:
The tools required are as follows:
- Slotted screwdriver
- Mobile oil or grease
- Gasoline
- Brush
- Appropriate clamp.
Our recommended products:
To conclude, here are some recommended products on Amazon to fix a slamming motorcycle chain:
Other parts for your motorcycle available on Amazon
The solution to this problem is that the motorcycle chain should always be lubricated with oil or Mobile grease. To do this, you need to follow the following steps:
- Step 1: Open the chain cover, if applicable, using pliers.
- Step 2: Clean the chain sprocket set using gasoline and a brush.
- Step 3: Apply grease or loose oil on the chain and sprocket teeth. While applying the oil or grease, keep rolling the wheel and apply the lubricant accordingly.
- Step 4: When the chain and sprocket are completely lubricated, close the chain cover using pliers.
You are ready to go for a nice ride and your motorcycle chain will be quiet.
If you think you can't do it right then you need to see a mechanic for your ride.
Cleansing essence available on Amazon
A motorcycle chain that slams due to a worn chain sprocket
Chain sprockets are like other parts of the motorcycle, but they are more important. When the chain sprocket sets are not replaced for a long time, the set wears out. For example, an original chain sprocket set for a city motorcycle is capable of traveling over 15 km.
When the motorcycle has reached the limit of the chain sprocket clearance, the chain makes a horrible snap. Sometimes it feels like the chain is slipping off the sprocket when you kick the accelerator. There is a specific procedure to check if it has exceeded its lifecycle limit.
If you want to check the motorcycle chain, open the chain cover, if applicable. Carefully examine the teeth of the chain sprocket. If the teeth have become so sharp that they cut your finger if you touch them, replace them immediately before they break the motorcycle chain. Any accident can happen when the motorcycle chain breaks while riding.
If you do not understand anything from our explanations and you think you should entrust your motorcycle to a specialist, we strongly recommend that you do so. If you only want to find out what the problem is on your motorcycle then it will be good to see as we explain.
Sprocket teeth available on Amazon
solution:
If the chain teeth have become very sharp, then take your motorcycle to a mechanic and have the sprocket set replaced with a new one. If your sprockets are in good condition but the chain is damaged, and you think the new chain can help your motorcycle run properly, then have the chain replaced with a new one.
