Riding a motorcycle is not just another way of getting around, of getting around. It is not just an alternative means of transport. In addition to sometimes costing less than a car, riding a motorcycle brings a unique feeling of freedom. Pleasure is created in the cold wind that pierces you, as well as the intimate relationship you have with your machine. For motorcycle enthusiasts, this piece of junk is borderline art. the power to weight ratio, embodied in the design of the motorcycle, provides an experience that you cannot find in cars. If your motorcycle offers you so much, then you owe it to it. You must maintain and take care of your machine. It doesn't just happen in the way you drive, but it also happens in the little details, starting with cleaning it up. This article offers you some tips and advice to help you better clean the frame of your motorcycle.
While driving every day, your motorcycle receives countless residues of mud, stones and projectives. Corrosive mixtures destroy metal surfaces and their paint. By cleaning all these layers of dirt not only allows you to give your motorcycle its aesthetics, but also allows you to spot any leak or failure in its parts.
Motorcycles - general information
Do not hesitate to consult our guide on motorcycles to learn about the different types of motorcycles that exist, the characteristics of each and buying advice if you want to replace your motorcycle.
How to clean a motorcycle frame?
Cleaning a motorcycle has its rules and steps to be able to do a correct and complete job. Before starting the first step, put your motorcycle in the shade. If it is in the sun during washing, the products will dry faster and leave traces that will have to be removed by rubbing. This can easily ruin the polish. When your motorbike is in the shade, and you've put it on some packing boxes, you're ready for the first step.
Step 1 - First pass in the water
Start by removing the seat, tank, fairings, side panels, and any other parts of the bike that are preventing you from reaching the bike frame. These parts can be cleaned separately. Now that you have access to the motorcycle frame, you will have to make a first passage in the water. We advise you to hide all the electrical parts as well as the air filter so as not to touch them. Insist on everything related to the exhaust. This area is always covered with dirt, the accumulation of which affects the correct operation of the system.
Step 2 - Start at the top of the frame
Use two rags or two sponges. The first is dedicated to the cleanest part of the bike, which is usually the top. The second is for the bottom which is much dirtier. Still based on the fact that the top is cleaner than the bottom, clean your frame from top to bottom. Otherwise, washing the top second, drips of dirt could re-soil the clean bottom. Rinse everything with a water jet, making sure that the jet is not too powerful and that the water does not touch the electrical parts and the air filter.
Step 3 - Rinsing and drying
Finally, iron everything with a chamois, an old cotton towel or a soft lint-free cloth to remove all traces of lime. You can then use different products specifically designed for motorcycles.
With which products to clean a motorcycle frame?
The effectiveness of the products depends on their intensity and their aggressiveness. You can use household products, but you must read the instructions carefully, being careful that it is not aggressive. After rinsing your motorcycle, you can apply a "polish" product like Belgom, which is very effective in erasing micro-scratches and leaving a protective layer. But you still have to be careful because some polishes should not be put on unvarnished raw aluminum. You can then accompany it with a degreaser, as well as WD40 or wood wax. Remember that you should maintain and deeply clean your motorcycle at least quarterly.
Belgom motorcycle cleaner on Amazon
WD40 motorcycle cleaner on Amazon
Motorcycle frame cleaning techniques to avoid
Pouring a bucket of soapy water is not recommended. Besides being useless, the solution can seep into different parts and damage the electrical parts of the motorcycle. Avoid high pressure washing. Even though it is efficient and less tiring, the hot water jet can throw debris, residue, and dirt in general where it is not needed, which can cause failures in the mechanisms of the motorcycle. Avoid “no-rub” products. In order for them to be "effective", the manufacturers of these make them very aggressive and harmful in the long term. Scraper sponges are also to be avoided like any other aggressive or scratching material.
The products recommended in this article
Pack of 2 Belgom products. Belgom Aluminum cleans, shines, polishes and protects aluminum, copper and all alloys. Belgom Chrome is a liquid polish that thoroughly rids chrome of any encrusted dirt.
This product guarantees optimized maintenance to extend the life of the part. It is clear and easy to use. It quickly removes dirt, grime, dust and oils from chains.
Cleaning brush kit: contains 2 cleaning brushes, a motorcycle chain cleaning brush, a simple and ideal solution for chain maintenance, which is easy to use.
